Sale!

EV Electro-Voice 12″ passive subwoofer with Parallel Neutrik Speakon high current input connectors – Sb122

$737.00

The Electro-Voice Sb122 bass module is a very compact, lightweight subwoofer system that is designed to add bass enhancement to EV Sx and Zx Series speaker systems. The Sb122 combines the advantages of a long-throw 12″ woofer with a strong, lightweight composite enclosure. The large vent provides less vent compression and turbulence for increased low frequency output. The EVS12SB cast frame transducer created for the Sb122 uses the same motor and suspension design as the EVS18S used in EV’s larger systems. With nearly two inches of peak-to-peak excursion capability, this is literally a twelve inch with the heart of an eighteen. An integral low-pass filter allows the Sb122 to be directly connected in parallel with a full-range speaker for truly impressive low-end output without the need for an additional amplifier and processor.

Description

Sb122

12″ passive subwoofer

  • Very Compact and Lightweight — Only 33 lbs/15.0 kg
  • Integral handle
  • 400 Watt continuous, 1,600 Watt peak power handling
  • Parallel Neutrik Speakon high current input connectors
  • Cast frame EVS12SB 12-inch high excursion subwoofer driver
  • Integral low-pass filter — No additional amplifier or processor needed
Frequency Range (-10 dB)¹43Hz – 200Hz
LF TransducerEVS12SB, 12 in (305mm)
Crossover Frequency80Hz – 160Hz
Connector Type(2) Neutrik Speakon NL4
Sensitivity 1 W/1 m99dB
Height23.07″ (586mm)
Width16.89″ (429mm)
Recommended High-Pass Frequency40Hz
Depth12.28″ (312mm)
Weight Net33.07lbs (15kg)
Frequency Response (-3 dB)52Hz – 145Hz
Shipping Weight36.38lbs (16.5kg)
Impedance
Power Handling (Continuous / Peak)400/1600W
Maximum SPL131dB

Reviews

There are no reviews yet.

Be the first to review “EV Electro-Voice 12″ passive subwoofer with Parallel Neutrik Speakon high current input connectors – Sb122”

Your email address will not be published.